| PLZ164WL | PLZ334WL | |
|---|---|---|
| Overvoltage protection (OVP) | Turns off the load at 115 % of the rated voltage | |
| Overcurrent protection (OCP) | Setting range 10 % to 110 % of the rated current. Load off or limit selectable. | |
| Overpower protection (OPP) | Setting range 10 % to 110 % of the rated power. Load off or limit selectable. | |
| Overheat protection (OHP) | Turns off the load when the heat sink temperature reaches 90 °C | |
| Undervoltage protection (UVP) | Turns off the load when detected. Can be set in the range of 0.3 V to 30 V. | |
| Reverse connection protection (REV) | By diode and fuse. Turns off the load when an alarm occurs. | |
27806
PLZ164WL_Protection function
Related specifications : PLZ-4WL
- PLZ164WL_Input /Output signal_Front panel BNC connector
- PLZ164WL_Sequence function_Fast sequence
- PLZ164WL_General Specifications
- PLZ164WL_Input /Output signal_J1 connector(26-pin MIL connector)
- PLZ164WL_Other functions
- PLZ164WL_Sequence function_Normal sequence
- PLZ164WL_Protection function
- PLZ164WL_Remote sensing
- PLZ164WL_Response
- PLZ164WL_Soft start
- PLZ164WL_Slew rate
- PLZ164WL_Switching mode
- PLZ164WL_Wattmeter
- PLZ164WL_Ammeter
- PLZ164WL_Voltmeter
- PLZ164WL_Constant power (CP) mode
- PLZ164WL_Constant voltage (CV) mode
- PLZ164WL_Constant resistance (CR) mode
- PLZ164WL_Constant current (CC) mode
- PLZ164WL_Ratings
