| Item/Model | 400W | 800W | 1200W | 2000W | |
|---|---|---|---|---|---|
| Output-on/ off delay | Setting range: 0.0 s, 0.5 s to 99.9 s *1 setting resolution: 0.1 s | ||||
| Soft start and soft stop | Setting range: 0.0 s, 0.5 s to 10.0 s *1 setting resolution: 0.1 s | ||||
| Overcurrent protection (OCP) activation delay | Setting range: 0.0 s to 2.0 s *1 setting resolution: 0.1 s | ||||
| Preset memory | Up to three sets of the following settings can be saved: the set voltage, the set current, the set OVP, the set OCP, and the set UVL. | ||||
| key lock | Locks the operation of all keys other than the OUTPUT key. | ||||
| CONFIG shortcut | Up to three CONFIG parameters can be registered to the SC1, SC2, and SC3 keys | ||||
| Sequence | Number of programs: 1 | ||||
| Number of steps: 64 | |||||
| Repetition count: 1 to 99998, INFinity | |||||
| Number of configurable interval loops: 16 | |||||
| Number of interval loops: 2 to 99998 | |||||
| Step time: 0.1 s to 100 h (common to step transition and ramp transition) | |||||
| Synchronized Operation | Synchronization of voltage and current settings, synchronization of the resumption of steps in a sequence program | ||||
| Master-slave parallel operation *2 | Up to three units (same models) including the master unit | Up to two units (same models) including the master unit | |||
| Series operation *3 | Two units (the same model) | ||||
| Multichannel (VMCB) | Connection between the master unit and PC | LAN, USB, RS232C | |||
| Connection with slave units | LAN | ||||
*1. Factory default is 0.0 s. *2. Current difference between the master and slaves is 5 % (TYP). *3. H type is excluded
