Rack mount frame
RMF4M
22,000円 （税込：24,200円）
- Designed according to JIS/EIA standards
- For use with rack mounting frame and special brackets
Product Overview
RMF4 and RMF4M are rack mount frames to be used with standard racks. Designed to meet the EIA/JIS standards, they are used to install models ranging from 1/2 rack to 1/6 rack in width using a rack mount frame bracket.
Rack mount frame
*Please consult our sales staff if you wish to rack-mount the power supply controller PIA3200 and 4800 series or GPIB programmer DPO2212A together with the power supply equipment.
RMF Series
| Product name | Series | Type | Width | Rack mount frame model No. | Bracket necessary when fastening mainframe to rack mount frame | ||
|---|---|---|---|---|---|---|---|
| JIS Standard Rack (Millimeter Size) | EIA Standard Rack (Inch Size) | Panel width(*1) | |||||
| DC Power Supply | PAN-E | 175W | 1/4 | RMF4M | RMF4 | 4（*2） | B42 |
| 350W 700W | 1/2 | B22 | |||||
| PAN-A | 0 | 1/4 | B42 | ||||
| I2 [I3] | 1/2 | B22 | |||||
| PAL | I2 [I3] | 1/2 | |||||
| PDM35-3 | 1/2 | ||||||
| PAD | I | 1/2 | |||||
| Electronic load | PLZ-W2 | I | 1/6 | ||||
| II | 1/3 | ||||||
| PLZ-152WA | 1/2 | 4 | B22 | ||||
| PLZ-W | I2 [I3] | 1/2 | 4（*2） | ||||
| Power Supply Controller | PIA4810 PIA4820 | 1/2 | 4（*2） | B2-PIA4810/20 | |||
| PIA3200 | 1/4 | B4-PIA | |||||
| DPO2212A | (1/2) | B24 | |||||
*1: EIA 1 sheet width is 44.45mm (1 3/4″). The sheet width does not include rubber feet, casters and levelers.
*2: Since there are air intake holes for forced air cooling on the sides, top, and bottom of the main unit, at least one blank panel with a width of at least one must be installed when mounting the unit in a rack.
*3: Because of natural air cooling, heat dissipation measures are required when mounted in a rack.
Catalog
Manual
