| Item | Specifications | |
|---|---|---|
| AC input | Nominal input rating | 100 V to 240 V, 50 Hz to 60 Hz |
| AC input | 90 V to 250 V | |
| Maximum power consumption | 70 VA | |
| Withstanding voltage | Between the voltage and current input terminals and the chassis and interface | 1980 Vac for 5 minutes |
| Between the voltage and current input terminals and the AC input | ||
| Between the voltage input terminals and the current input terminals | ||
| Between the AC input and the chassis | 1500 Vac for 1 minute | |
| Insulation resistance | Between the voltage and current input terminals and the chassis and interface | 100 MΩ or greater at 500 Vdc |
| Between the voltage and current input terminals and the AC input | ||
| Between the voltage input terminals and the current input terminals | ||
| Between the AC input and the chassis | ||
| Environmental conditions | Operating environment | Indoor use, overvoltage category II |
| Operating temperature | 0 °C to +40 °C | |
| Operating humidity | 20 %rh to 80 %rh (no condensation) | |
| Storage temperature | -20 °C to +70 °C | |
| Storage humidity | 90 %rh or less (no condensation) | |
| Altitude | 2000 m or less | |
| Earth continuity | 0.1 Ω or less at 25 Aac | |
| Safety *1 | Complies with the requirements of the following directive and standard. Complies with the requirements of the following directive and standard Low Voltage Directive 2006/95/EC *2 EN61010-1, class I, pollution degree 2 | |
| Electromagnetic compatibility (EMC) *1*2*3 | Complies with the requirements of the following directive and standard. EMC Directive 2004/108/EC EN61326-1 Compliance condition: The maximum length of all cabling and wiring connected to the KPM1000 must be less than 3 m. | |
| Dimensions | See the outline drawing | |
| Weight | Approx. 2.5 kg (5.51 lb.) | |
| Accessories | Power cord (three-pronged) 1, Safety plugs (solder-connection type) 1 set (red and black), CD-ROM *4 1, Quick start English: 1, Japanese: 1, Safety information 1 (contains English, Chinese, and Japanese) , Packing list 1 (contains both English and Japanese) | |
*1 Does not apply to specially ordered or modified KPM1000s. *2 Limited to products that have the CE mark on their panels. *3 The measured values may be affected by noise. Use shielded cables for the communication cables. The act of connecting measuring cables may cause radio interference, in which case users may be required to correct the interference.
*4 Contains the User’s Manual, the Communication Interface Manual, and the KI-VISA library.
