| Setting range | Setting item | Description |
|---|---|---|
| By step | Load value | Current, conductance, voltage, power. The values that can be set depend on the current operation mode. |
| Slew rate | Sets the speed of change when the current is changed. | |
| Step execution time | 0.000050 s to 3600000 s (50 μs to 1000 h), resolution: 1 μs | |
| Load on/off control | To turn the load on, set the load setting transition method to step or ramp. | |
| Others | Trigger signal setting, trigger signal output | |
| For each program | Number of loops of program | 1 to 100000 repetitions, or infinite repetitions. |
| Protection functions | Specifies the value at which a protection function (OCP, OPP, UVP) is activated. |
27806
PLZ-5WH2_Sequence function
Related specifications : PLZ-5WH2 Series
- PLZ-5WH2_LINEUPS
- PLZ-5WH2_External Control
- PLZ-5WH2_Alarm Function
- PLZ-5WH2_Sequence function
- PLZ-5WH2_Sine function
- PLZ-5WH2_Pulse function
- PLZ-5WH2_Integrated Data Function
- PLZ-5WH2_Data Logging Function
- PLZ-5WH2_Soft start
- PLZ-5WH2_Changing the Response Speed
- PLZ-5WH2_Cutoff function
- PLZ-5WH2_Operation mode
- PLZ-5WH2_General specifications
- PLZ-5WH2_Communication function
- PLZ-5WH2_BNC connector
- PLZ-5WH2_EXT CONT connector
- PLZ-5WH2_Other functions
- PLZ-5WH2_Cutoff function
- PLZ-5WH2_Integration display
- PLZ-5WH2_Sequence function
- PLZ-5WH2_Alarm function
- PLZ-5WH2_Soft start
- PLZ-5WH2_Sine function
- PLZ-5WH2_Slew rate
- PLZ-5WH2_Pulse function
- PLZ-5WH2_Measurement function
- PLZ-5WH2_Arbitrary I-V characteristics (ARB) mode
- PLZ-5WH2_Constant power (CP) mode
- PLZ-5WH2_Constant voltage (CV) mode
- PLZ-5WH2_Constant resistance (CR) mode
- PLZ-5WH2_Constant current (CC) mode
- PLZ-5WH2_Rating
