| PWR401L | PWR401ML | PWR401MH | PWR401H | PWR801L | PWR801ML | PWR801MH | PWR801H | PWR1201L | PWR1201ML | PWR1201MH | PWR1201H | PWR2001L | PWR2001ML | PWR2001MH | PWR2001H | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vrtg [V] | 40 | 80 | 240 | 650 | 40 | 80 | 240 | 650 | 40 | 80 | 240 | 650 | 40 | 80 | 240 | 650 |
| Irtg [A] | 40 | 20 | 5 | 1.85 | 80 | 40 | 10 | 3.7 | 120 | 60 | 15 | 5.55 | 200 | 100 | 25 | 9.25 |
| Rint [Ω] | 0.001 to 1.000 | 0.001 to 4.000 | 0.01 to 36.00 | 0.1 to 263.5 | 0.001 to 0.500 | 0.001 to 2.000 | 0.01 to 18.00 | 0.1 to 131.8 | 0.001 to 0.333 | 0.001 to 1.333 | 0.01 to 12.00 | 0.1 to 87.84 | 0.001 to 0.200 | 0.001 to 0.800 | 0.01 to 7.20 | 0.01 to 52.70 |
| Resolution *1 | 0.001 | 0.001 | 0.01 | 0.1 | 0.001 | 0.001 | 0.01 | 0.1 | 0.001 | 0.001 | 0.01 | 0.01 | 0.001 | 0.001 | 0.01 | 0.01 |
Vrtg : rated output voltage, Irtg : rated output current, Rint : internal resistance
0 ＜ Rint(min)≦ Rint(max)
L type, ML type: Rint (max)= Vrtg/ Irtg
MH type, H type: Rint (max)= Vrtg/ Irtg x 3/4
The variable internal resistance function can be configured only in constant voltage(CV) mode.
*1. Resolution when FINE is in use
The maximum internal resistance that can be set during parallel operation is the value obtained by dividing Rint (max) during standalone operation by the number of units in parallel operation. The resolution is the value obtained by dividing the resolution during standalone operation by the number of units in parallel operation.
