27813

TOS9300_Interface (Common)

ItemTOS9300TOS9301TOS9301PDTOS9302TOS9303TOS9303LC
REMOTE5-pin DIN connector. Connect the following option to remotely control the starting and stopping of tests.
  • Remote control box RC01-TOS, RC02-TOS
  • High voltage test probe HP01A-TOS, HP02A-TOS (when the test voltage is 4 kVac 5 kVdc or less)
SIGNAL I/OD-sub 37-pin connector. For the pin arrangement
FunctionEnable/disable interlock, recall setup memories, recall auto test programs, start/stop testing, monitor the test and voltage generation status, monitor the test status, monitor judgment results, monitor the step execution status of auto tests, monitor the activation status of protection functions
Input specifications The input signals are all low-active control. The input terminal is pulled up to +12 V by a resistor. Leaving the input terminal open is equivalent to applying a high level signal.
High-level input voltage11 V to 15 V
Low-level input voltage0 V to 4 V
Low-level input current-5 mA max.
Input time width5 ms min.
Output specificationsOutput methodOpen collector output (4.5 Vdc to 30 Vdc)
Output withstanding voltage30 Vdc
Output saturation voltageApprox. 1.1 V (25 °C)
Maximum output current400 mA(TOTAL)
STATUS OUTOutput terminal of an option product.
Positive terminal (red)Outputs +24 V. Use Status Out of CONFIG settings to set the output conditions.
Negative terminal (black)+24 V circuit common.
SCANNERMINI DIN 8-pin connector. Terminal for the optional TOS9320 high voltage scanner. The maximum number of connections is 4 devices(16 channels).
USB (host)Standard type A socket, FAT32, 32 GB or less Complies with the USB 2.0 specifications; data rate: 12 Mbps (full speed)
Remote controlAll functions except turning on and off the power, key lock, and auto test can be remotely controlled.
RS232CHardwareD-sub 9-pin connector (EIA-232D compliant) Baud rate: 9600, 19200, 38400, 57600, 115200 bps Data length: 8 bits; stop bits: 1 bit; parity bit: none, flow control: none/CTS-RTS
Message terminatorLF during reception, LF during transmission.
USB (device)HardwareStandard Type B connector. Complies with the USB 2.0 specifications; data rate: 480 Mbps (high speed)
Message terminatorLF or EOM during reception, LF + EOM during transmission.
Device classComplies with the USBTMC-USB488 device class specifications.
LANHardwareIEEE 802,3 100Base-TX/10Base-T Ethernet. Auto-MDIX compliant.IPv4, RJ-45 connector.
Compliant standardsLXI 1.5 Core Specification 2011
Communication protocolVXI-11, HiSLIP, SCPI-RAW, SCPI-Telnet
Message terminatorVXI-11, HiSLIP: LF or END during reception, LF + END during transmission. SCPI-RAW: LF during reception, LF during transmission.
Display7-inch LCD

Related specifications : TOS9300 Series

Please feel free to contact us with any questions or concerns.

Download a Product CatalogView List
Request a QuotationContact Us

KIKUSUI Holdings

EMZ

Language
© KIKUSUI ELECTRONICS CORP 2025.
Privacy Policy |