SD005-KHA

SD005-KHA

100,000 (税込:110,000

  • Harmonics ExplorerVer 3.5 (for KHA1000 only)
  • The SD005-KHA Harmonics Explorer remotely controls the KHA1000 from a PC and retrieves harmonic current test result files from the KHA1000. In addition to LIN1020JF/3020JF, it can also remotely control PCR-LE/LE2/LA/L.

カート機能が動くまでの

Overview

Application software for KHA series

This dedicated application software consists of 3 programs. Using this software, you can set test conditions and control the execution of tests. You can also control the AC power supply (PCR-LE) used for tests. Furthermore, you can print the harmonic spectrum, and current and voltage waveforms on your reports.

Program configuration of SD006-KHA Harmonics Analyzing Suite and SD005-KHA Harmonics Explorer

Open in a new windowZOOM
SD006-KHASD005-KHASpecifications
HarmoCapture 3HarmoCaptureOffers functions to set conditions for harmonic current tests and voltage fluctuation tests, read test conditions, execute tests and save and display test result data.
  • Test condition setting
  • Start/stop of test
  • Retrieval of test result files
  • Display of measured values
  • Control of AC source PCR-LE
  • Entry of comments
  • Report printing
HA File Analyzer 3HA File AnalyzerOffers functions to analyze harmonic test data.
  • Display of test result list
  • Display of graphs (V/I waveforms, 2D harmonics, 3D harmonics, vectors, current trend, harmonic trend and THC trend)
  • Saving of test result files in text format and repeatability check
  • Report printing
Vf File Analyzer 3Vf File AnalyzerOffers functions to analyze voltage fluctuation test data.
  • Display of test result list
  • Display of test result list and display of flicker list
  • Display of graphs (dc%, dmax%, d(t) >3.3%) (CPF)
  • Saving of test result files in text format
  • Report printing

HarmoCapture 3 / HarmoCapture

HarmoCapture 3 / HarmoCapture lets you control KHA Series remotely from a PC in the same way you control it from the operation panel of the device. The program will start as appropriate for the test mode.

Test condition setting screen for harmonic current tests

Test condition setting screen for harmonic current tests

Comment entry

Test condition setting items for harmonic current tests.
Test condition setting items for flicker and voltage fluctuation tests.
Open in a new windowZOOM
Common Item SettingsWhen Pst Auto is selectedWhen manual switching is selectedIEC61000-3-11 Ed1.0
Setting the wiring method
Limit Standard
Measurement Technology Standards
Voltage range
Current range
Designation of input terminal
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
dmax limit
Flicker Margin
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
d Measurement time
d測定回数
dmax limit
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
Test impedance
Judgment limit value

HA File Analyzer 3 / HA File Analyzer

HA File Analyzer 3 / HA File Analyzer are application programs that allows you to analyze the data in the test result files (xxx.hr3 / xxx.hr) saved by HarmoCapture 3 / HarmoCapture. It is not necessary to connect with KHA Series to run, so, you can analyze test data anywhere you want.

Composition of the screen
Open in a new windowZOOM
Results List PaneLists the test results file for the harmonic current test.
Graph and Data PaneDisplays a graph of test results file for the harmonic current test.

Composition of the screen 1

Composition of the screen 2

Results of repeatability checks

Displays the decision results between the files in the result list, as well as the decision results for each order. Files can be compared from 2 to a maximum of 15 files.

Examples of repeatability checks

Save test result files as text

Test result files can be used in Microsoft Excel or as text for use in other application software.

Excel example.

Report printing of test result files

Reports (PDF) can be printed from test result files saved by the KHA series or HarmoCapture 3/HarmoCapture.

Examples of harmonic test reports

Vf File Analyzer 3 / Vf File Analyzer

VF File Analyzer 3 / VF File Analyzer are application programs that allows you to analyze the data in the test result files (xxx.vr3 / xxx.vr) saved by HarmoCapture 3 / HarmoCapture. It is not necessary to connect with KHA Series to run, so, you can analyze test data anywhere you want.

Composition of the screen
Open in a new windowZOOM
Total Measurement Time Waveform Display PaneDisplays the voltage fluctuation waveform of each measurement time. Each measurement time is connected together along the time axis. The vertical axis represents the voltage ratio with respect to the nominal voltage in terms of a percentage. The horizontal axis represents the elapsed time in unit of seconds. Test data A and B are displayed simultaneously.
Test Results / Set Value List PaneDisplays the test results list and test conditions. The judgment result of each segment and the final judgment over all the measurement times are displayed. You can click the tab to switch between the test results list and test conditions data displays. Select test data A or B to be displayed.
CPF Waveform Display PaneDisplays a graph of the CPF (cumulative probability function). You can view the probability distribution of voltage fluctuations. Select test data A or B to be displayed.

List of test results when manual switching is used.

Vf File Analyzer

List of test results when manual switching is used.

The ‘voltage change caused by manual opening and closing’ specified in IEC 61000-3-3 A1 (2001) Annex B is determined by taking the arithmetic mean of 22 measurements, excluding the largest and smallest of the measurements obtained from a maximum of 24 measurements.

Save test result files as text

Test result files can be saved as text for use in Microsoft Excel or for use in other application software.

Report printing of test result files

Reports (PDF) can be printed from test result files saved by the KHA series or HarmoCapture 3/HarmoCapture.

Operating environment

  • Personal computer with Microsoft Windows 10 or 7 (32-bit or 64-bit)
  • At least 2 GB of memory (4 GB or more recommended)
  • 1024 x 768 dots or higher resolution
  • 20 GB or more free hard disk space (more space required for saving data)
  • CD-ROM drive
  • Mouse or other pointing device
  • VISA libraryNI-VISA 4.1 or later; Keysight IO Libraries Suite 14.1 or later; or KI-VISA 4.2.2 or later
  • USB cable (when using USB)
  • GPIB card and IEEE488 cable (when using GPIB)
  • Cross serial cable (when controlling AC power supply via RS232C)
  • CompactFlash Type I (CFA), up to 512 MB (when using KHA3000 files)

Operation Manuals

Please feel free to contact us with any questions or concerns.

Download a Product CatalogView List
Request a QuotationContact Us