Overview

The KRO Series are designed in accordance with both JIS Standards and EIA Standards.Since these racks are equipped with support angle as standard, even heavy products can be mounted. (With products weighing more than 70 kg, use a rack with brackets.) The KRO Series conforms both JIS and EIA standards simply replacing the front panel with the rear panel. The KRC series is a multifunctional decorative rack that is based on a steel cabinet rack and designed to allow the attachment of various rack options.

Rack Mount

Various Kikusui products can be easily mountedin a rack by using a bracket and rack mountframe, rack adaptor, etc.JIS standards (millimeter size) and EIA standards(inch size) racks are available. Bracketsand rack mount frames, rack adaptors, etc.applicable to each type are also available.

Since the width of one panel is 50 mm for JISStandards and 44.45 mm (1 3/4 inch) for EIAStandards, the bracket and rack mount frame,etc. of the panel width matched to the productbody are selected based on one panel width.

* The KRO Series are sold in kit form. * The support angle is designed for Kikusui racks and products. It is not interchangeable with products of the other manufacturer. * The KRO Series payload weight can be increased to approximately 400 kg by changing the casters.